I don't think this had been done yet, and lately I have been into loaders. I'll start
let's see your front end loaders!
nick4030
901 - 920 of 1,257 Posts
Joined
·
114 Posts
Ok guys here is the thing. I am in the process of bringing a rough John Deere 317 to close to new looking condition. I built a center blade for a grader next I have an old TC 10 loader, I am going to cut the loader to make it wider, I guess I'm turning it into a TC 12. My Tc 10 is in very good condition now because I rebuilt all the cylinders, repainted it, it was rough, I'm also going to replace all lines. I have a friend who is about ready to cry because I'm cutting it. I told him I would hold off to see if he can find one to fit my tractor. Is there much value to the Tc 10 or doesn't it matter if I change it?
Joined
·
9,130 Posts
The 10TC fits the Ford LGT series as well as the Jakes, Olivers and White T&Cs.
It would be a real crime to cut up a factory loader. I'd hold out till I found a 12 and bolt it straight on.
If the 10TC is rebuilt as you say, you'd probably get $1500 for it here.
.
May not have a hood on at the moment but this Johnson 10TC is a 4 seater.:sidelaugh
Joined
·
15,366 Posts
Yes there is value to a 10 TC. What did it come off of?
Joined
·
114 Posts
Re: let's see your front end loader
I have no clue what it come off of, there was no subframe with it. I happened to see it last spring in a guy's Woods ditch. I happened to see it just before the grass grew or it would have been gone for another year. The old guy even forgot about it until I pulled in to talk to him about it. So I wire wheeled it and broke the rust off, primed it and painted it, this wasn't going to be a show piece, it was to be used the dump cyclender were totally shot so we had to cut new shafts and replace all packing. The hoses and piping must still be replaced.
I have no clue what it come off of, there was no subframe with it. I happened to see it last spring in a guy's Woods ditch. I happened to see it just before the grass grew or it would have been gone for another year. The old guy even forgot about it until I pulled in to talk to him about it. So I wire wheeled it and broke the rust off, primed it and painted it, this wasn't going to be a show piece, it was to be used the dump cyclender were totally shot so we had to cut new shafts and replace all packing. The hoses and piping must still be replaced.
Attachments
Joined
·
92 Posts
This looks great! Where did you buy the cylinders?..and what size are they?
Joined
·
20,933 Posts
Here the youngest loader operator I've seen so far...
Impressive build on that "Manually Operated" front loader too !..doubt I could build something that worked that good...https://www.facebook.com/AgricultureTechnologies/videos/1011471685545198/
Impressive build on that "Manually Operated" front loader too !..doubt I could build something that worked that good...https://www.facebook.com/AgricultureTechnologies/videos/1011471685545198/
Joined
·
9,130 Posts
Pretty cool !
And the great thing is he will out grow it, pass it along to a younger Brother, (or Sister) and Dad will get to build him a bigger one.:thThumbsU
Joined
·
1,965 Posts
that's pretty cool, it took me a bit to figure out that that was a kid:dunno:
Joined
·
13 Posts
2003 Legacy with FEL. Having rear counter-weight attachment fabricated.
Attachments
Joined
·
112 Posts
I hope cross posts are not frowned upon as I posted this the other day in the Ariens forum. she's a GT17 with a custom front end loader and power steering added. The architect welded the loader to frame directly.
.
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
.
Joined
·
9,130 Posts
We all tend to follow just a handful of favorite topics in an otherwise huge forum, so cross posting can be a good thing for those of us who would have otherwise not seen your pics. Everybody loves loaders.:thThumbsU
Too bad the installer never had any bolts at the time. I'd just keep a good eye out for frame cracks.
Joined
·
191 Posts
Legacy in Sweden, think its an 2003 but the loader looks different than the Legacy a few posts earlier. Want a narrow strong and light bucket for stone and gravel, some forks, special beehive lift ..........
![Image]()
Skickat från min iPhone med Tapatalk
Skickat från min iPhone med Tapatalk
Joined
·
112 Posts
Thanks Larry for the advise... will certainly be giving her the once over before putting her to work.
Joined
·
3,599 Posts
ARK Loader on a WH D250
Attachments
901 - 920 of 1,257 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
