[B-2 lawn Care]

Long story I bought this 485 about a month a go, it has the three point and came with a 62" deck. All worked well when I got it home. I have been using it to dethach, I went to put the deck on to night but the lift arms for the deck won't go down? I have a book on order, I am sure that I am over looking something. So I could use some help.

 

[Kansas John Deere]

dont know much about the 485 but have you tried to move the hook-up points down by hand yet? On my 318 sometimes I have to grab a hold of mine up under the tractor and pull them down to hook the mower deck back up on it.

 

[PA318Guy]

Do you have the deck height adjuster set for full down?

 

[69project]

Do you have the deck height adjuster set for full down?

That was going to be my recommendation. I know on my 400 you will not be able to hook up the deck unless they are adjusted down. I would think the newer generations are the same way. :trink40:

 

[Maverick74]

Do you have the deck height adjuster set for full down?

:ditto:

dont know much about the 485 but have you tried to move the hook-up points down by hand yet? On my 318 sometimes I have to grab a hold of mine up under the tractor and pull them down to hook the mower deck back up on it.

then :ditto:

 

[B-2 lawn Care]

Got it I am use to my 2305 with the independent lift, when I hook it up and push down the arms will drop, I just had to pull down on the lift arms. Thanks guys I started a another thread about decks, could use some help there as well