I picked up this model 49 Snow Blower the other day to use on my 317. Does anyone know what size belt I need to run it?
![Image]()
![Image]()
Look out old man winter! Got me a Model 49 Snow Blower.
fireman
1 - 20 of 34 Posts
Joined
·
2,282 Posts
:ditto::ditto: :fing32:
Joined
·
9,793 Posts
That is in nice condition, but has the short chute. BUT I do see a small problem with the 317 hummmmmmmm :banghead3
Joined
·
269 Posts
Congrats! From the pictures, it looks like you may be missing a shear bolt at the end of the auger. Maybe it's just a shadow though...
--Justin
--Justin
OK Katt, I'll bite. What's wrong with my 317?
GMeanie,
No, was a little more than $180. It was on CL in New York.
tubes_rock,
Yes the shear pin is missing. This hasn't been used in ten years. The older gentleman who last used it mowed a path in the yard and hit a BIG rock.
I also need to find some new skids for it one side is almost worn through. Need some shear bolts too. Anyone got parts number for them? I have the manual and it doesn't have a parts list.
GMeanie,
No, was a little more than $180. It was on CL in New York.
tubes_rock,
Yes the shear pin is missing. This hasn't been used in ten years. The older gentleman who last used it mowed a path in the yard and hit a BIG rock.
I also need to find some new skids for it one side is almost worn through. Need some shear bolts too. Anyone got parts number for them? I have the manual and it doesn't have a parts list.
Joined
·
64 Posts
Go to the hardware store and buy some reg. bolts 1\4" I think, and I just weld some flat bar on the bottom of my skids works great and don't cost much. Good luck you will love it, as much as I love mine. Oh, P.S, you already have three bolts in the holder beside the drum that holds the cable. Have fun!!! Let it SNOWWWWWWWWWWW
Joined
·
10,320 Posts
Katt is our resident emblem checker. Don't worry, he would be in apoplexy if he ever saw all of my collection!
Joined
·
9,793 Posts
You need this if you have a John Deere. It's the parts page just type 49 or 317 in the little box, alphabetical, S , Shear pin or G grill emblem :biglaugh:
http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.HomePageServlet_Alt
ggsteve is from MA. and is hassled enough from the State so I give him a pass:banghead3
Didn't even see the 3 bolts in the drum :crybaby: I D 10 T mistake!
http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.HomePageServlet_Alt
ggsteve is from MA. and is hassled enough from the State so I give him a pass:banghead3
Didn't even see the 3 bolts in the drum :crybaby: I D 10 T mistake!
Joined
·
9,793 Posts
2nd picture........ Middle 1/2 of right side auger you can see a silver bolt on the left side you only see a hole.
Note: not all jD blowers have shear pins ( bolts) yours is a long chute model.
The spares are kept on the turning drum I think a total of 5 or 6
Note: not all jD blowers have shear pins ( bolts) yours is a long chute model.
The spares are kept on the turning drum I think a total of 5 or 6
I see them! COOL! On the left side between the first and second auger blade on the backside of the blower you will see three bolts in a triangle pattern. Thanks for the help. I would like to find a tall chute for this. HMMMMMMM! Maybe I can just extend the existing one?
1 - 20 of 34 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
