My Tractor Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
11 Posts
I am seriously looking at two ~40hp tractors. Both have some issues.

The Yanmar F395 has a bad hydraulic pump, but everything else works "supposedly". Selling for $7.5K. 1750 miles. Looks about right for the mileage. I am only guessing it is a F395, as the owner cannot find and photograph the model number plate. I have photos of the tractor, and it "looks" like a F395 Yanmar. It also has a canopy.

Kubota L345, has a bad head gasket, 1500miles, requires starting fluid to start (Head Gasket, or low compression, or glow plugs ?) And has some minor leaks, as expected. All the hydraulics work. Selling for $4K. Looks like it has a LOT more miles than 1535mi, so I suspect the Odometer is not working. Owner does not know if the 1500mi is accurate. It does not have a canopy.

I am upgrading from a 19hp Iseki, (Grey Market) that is near impossible to get parts for, and has a poor transmission design that causes the 4WD transfer gear to fail under heavy loads.

I want to replace the 19hp with something I can keep forever, and still find parts for. Leaning toward the Yanmar since it has slightly more HP, and looks to be in better shape. But I suspect the Kubota is the better value, long term. I can do the head gasket repair myself.
I am familiar with the reliability of both brands. Just not sure about the Yanmar F395 model, as there are not a lot of them around. I do know the Kubota L345 is a tank.
Both of these tractors are a 4-6hour round trip for me. So I would like to make one trip with a trailer, rather than a look-see trip, and then back again with the trailer.

Please advise.
I am seriously looking at two ~40hp tractors. Both have some issues.

The Yanmar F395 has a bad hydraulic pump, but everything else works "supposedly". Selling for $7.5K. 1750 miles. Looks about right for the mileage. I am only guessing it is a F395, as the owner cannot find and photograph the model number plate. I have photos of the tractor, and it "looks" like a F395 Yanmar. It also has a canopy.

Kubota L345, has a bad head gasket, 1500miles, requires starting fluid to start (Head Gasket, or low compression, or glow plugs ?) And has some minor leaks, as expected. All the hydraulics work. Selling for $4K. Looks like it has a LOT more miles than 1535mi, so I suspect the Odometer is not working. Owner does not know if the 1500mi is accurate. It does not have a canopy.

I am upgrading from a 19hp Iseki, (Grey Market) that is near impossible to get parts for, and has a poor transmission design that causes the 4WD transfer gear to fail under heavy loads.

I want to replace the 19hp with something I can keep forever, and still find parts for. Leaning toward the Yanmar since it has slightly more HP, and looks to be in better shape. But I suspect the Kubota is the better value, long term. I can do the head gasket repair myself.
I am familiar with the reliability of both brands. Just not sure about the Yanmar F395 model, as there are not a lot of them around. I do know the Kubota L345 is a tank.
Both of these tractors are a 4-6hour round trip for me. So I would like to make one trip with a trailer, rather than a look-see trip, and then back again with the trailer.

Please advise.
So I just got what I believe to be an F395. The tractor is stout and I like it . I did have some hydraulic issues with it. I was told it needs a new pump so I had it rebuilt. The pump on mine is a 15 spline which is somewhat rare but they are out there . They are available look for a CH13990 for a john deere . I am almost positive its the same pump. I have also learned that many Yanmars are particular about the filter you run. I've heard Napa filters and such can be too restrictive and can be remedied by getting a longer filter or one spec'd out for more flow . I ordered one for mine from Hoye they claim to have the best one for old Yanmars .
 

·
Registered
Joined
·
11 Posts
I am seriously looking at two ~40hp tractors. Both have some issues.

The Yanmar F395 has a bad hydraulic pump, but everything else works "supposedly". Selling for $7.5K. 1750 miles. Looks about right for the mileage. I am only guessing it is a F395, as the owner cannot find and photograph the model number plate. I have photos of the tractor, and it "looks" like a F395 Yanmar. It also has a canopy.

Kubota L345, has a bad head gasket, 1500miles, requires starting fluid to start (Head Gasket, or low compression, or glow plugs ?) And has some minor leaks, as expected. All the hydraulics work. Selling for $4K. Looks like it has a LOT more miles than 1535mi, so I suspect the Odometer is not working. Owner does not know if the 1500mi is accurate. It does not have a canopy.

I am upgrading from a 19hp Iseki, (Grey Market) that is near impossible to get parts for, and has a poor transmission design that causes the 4WD transfer gear to fail under heavy loads.

I want to replace the 19hp with something I can keep forever, and still find parts for. Leaning toward the Yanmar since it has slightly more HP, and looks to be in better shape. But I suspect the Kubota is the better value, long term. I can do the head gasket repair myself.
I am familiar with the reliability of both brands. Just not sure about the Yanmar F395 model, as there are not a lot of them around. I do know the Kubota L345 is a tank.
Both of these tractors are a 4-6hour round trip for me. So I would like to make one trip with a trailer, rather than a look-see trip, and then back again with the trailer.

Please advise.
Dont know what you decided to do buy but I thought id update you on my issues. My Yanmar hydraulic issue was fixed by changing to the hydraulic filter from Hoye tractor.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top