Thanks, Frogmore, for the response. My problem is with the traction drive belt-- the belt that drives the transmission. I see the diagram for the deck drive belt. The only question I really have about the diagram is where the tensioning spring is supposed to attach. When the belt came off the spring came off, too. Or vice versa.
X350 drive belt issues
I need some advice on fixing my X350. I was mowing and the machine threw the drive belt. I pulled the 48" mower deck out and found the belt off on both ends and the spring was off the tensioning pulley assembly. I am not sure where the spring was supposed to attach and none of the diagrams show it. I hooked it in one of the holes in the assembly frame and it seemed to tension up the belt fine. The unit would drive forward and reverse until I put the mower deck back on. It seems to me the belt is slipping. The machine only has 33 hours on it. Is that normal? I have to tear it all apart again, so I'm hoping someone else with some experience can advise me on what to inspect. Everything looks good,but why would the belt throw off in the first place?
Thanks for your help.
Thanks for your help.
1 - 2 of 5 Posts
1 - 2 of 5 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
My Tractor Forum
A family friendly forum community dedicated to all Tractor owners and enthusiasts. Come join the discussion about specifications, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
