My Tractor Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
My x320 with about 115 hours, recently started to creep forward with the parking brake engaged, but will not go backwards with the brake engaged. I looked underneath and the linkage between the pedal and brake lever mechanism on the transmission seems unobstructed and moving within the normal limits when the brake pedal is engaged.

The brake pedal does seem to travel the normal distance, but with a bit less resistance. The hand lock for the brake seems to engage normally.

Any help to troubleshoot further would be greatly appreciated,

Thx,

Dan






Sent from the MTF Free App
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top