My Tractor Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
284 Posts
Discussion Starter · #1 ·
Just completing a weight box for my L3800 Kubota so I can pick up big rnd bales with spike. I used an old mini fridge that figured out to be 3.5 cu'. Calculated I needed a little over 5 bags of quikrete. I made the 3pt attachments with scrap metal I had lying around except I bought one end piece. I've got about $25 in it.
The skin on the fridge was a little rusty,but the lining was good and it all held together. I kept making the mix drier on each bag, but it was kind watery at the top,so my buddy kept adding dry on the top in the pic. It was hooked to the tractor so we could stabilize the attachment points easily.
 

Attachments

· Registered
Joined
·
284 Posts
Discussion Starter · #3 · (Edited)
Thinking about 450 lbs. 5- 80lb bags, one concrete block plus 20 + - of metal.

edit; I can pick up a 5x5 bale with no wt on rear and can move it on flat ground by keeping it low and 4x4 on. I have fluid in tires.
 

· Registered
Joined
·
284 Posts
Discussion Starter · #5 ·
Thanks. I seem to gravitate towards reusing things that are almost ready to be tossed.

1" pipe,blue tarp,cable ties,grommets, all on hand. Less than $5.
 

Attachments

1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top