My Tractor Forum banner

Will a 48" plow from a 320 fit my 316 Kohler?

1470 Views 4 Replies 2 Participants Last post by  ggsteve
I have a line on a 48" plow blade for my 316k. The seller says it is from his 320 and it should fit 200, 300 and 400 series. I know the front mount on my 1978 316 Kohler is the same all the way up to the 318, but I wanted to confirm about the 320 as it seems newer.
1 - 2 of 5 Posts
The 48" blade from a 320 (vintage early 90s) will not fit a 316 Kohler, nor will it fit any traditional 300 or 400 series tractors. It will fit the 320, 325, 335, 345, 240, 245, 260, 265, and 285.
The easiest would be to find a front hitch for your tractor and modify it to adapt the 48" blade to it. The problem is finding the front hitch by itself. Otherwise, if you can fab your own setup, which would require designing, cutting, drilling, and welding. The thing that makes me wonder what the blade actually fits, is the "dual hydraulics". The 48" blade for the 320 had no hydraulics.
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.