My Tractor Forum banner

When forward is reverse

1154 Views 4 Replies 5 Participants Last post by  bmac1996acc
Howdy Y'all.

I just spent well over half of my 18th birthday completing my K66 conversion on my LT180. Now, my only problem is the forward pedal makes the machine move backwards, and the reverse pedal moves it forward. It seems that the transmission is running the correct direction, the linkage just moves it backwards. Has anyone else ran into this small problem with their conversion?

Also: I have a hint for the conversion, I used G100 rims and hubs for an extra $100, instead of waiting for the G110 rims to show up.
1 - 1 of 5 Posts
Get a picture of how the linkage from the pedals hooks up to the tranny. Maybe someone will have a suggestion.

I'm not familiar with that model, but if the linkage moves a lever on a shaft at the tranny end, you might be able to reverse the lever on the shaft so that it reverses the effect of the forward and reverse pedals.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.