My Tractor Forum banner

well it was fixed...for all of five minutes

1380 Views 7 Replies 7 Participants Last post by  rscurtis
some of you may have coomented on my previous thread about how i was having carb problems on my 212. well after cleaning it three times it would not stay running and was hard to start. so i adjusted the float so it was level with the carb, and when i reinstalled it the tractor ran great and started almost instantly. so i figured problem solved, nope lol. got on it today and it will only start if you leave ther choke all the way out and the throttle has to be all the way down and itll only run for a minute tops. checked float and its fine and mixtures screws are all set right. im stumped, i think my carb is cursed lol
1 - 1 of 8 Posts
how long did U let it soak in carb cleaner? 6 hours min and 24 hours best!

Did you use high pressure air to blow out the pasages? (I like to run some small diamater wire throught them too. (A twist tie with plastic removed workd perfect)

(that is if you can find a twist-tie with wire in it anymore :))

Because it sounds like something is still clogged...

Will it run with the air cleaner removed??

Q: Did you use a carb kit? The new parts it supplies are really a good idea for a proper "rebuild/cleaning"...

See less See more
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.