My Tractor Forum banner

wat's this one worth...??

2900 Views 18 Replies 12 Participants Last post by  kklowell
3
ok...jusst got this tonite...a WHITE112 has a 12 hp Kolher cast iron horitizantal engine.. 4 gear tranny (cast iron) (creeper gear is one of the 4)..deck is made of cast Alum.... 12 inch rear tires





See less See more
1 - 19 of 19 Posts
Probably 20 bucks or so. If you can ship it to me, I can "dispose" of it properly.

Sure looks like a pretty good find to me! I have no idea what it would be worth, sorry.

Bob
I have to agree with SleazyRider, 20 bucks ??? Maybe 30 .. Tops
I have no problem picking it up either ;)

:sidelaugh

Nice Machine :fing32:
Whatever you do don't take the rubber band off, it's obviously holding the whole thing together!! :ROF :ROF That tractor has some personality!
No idea Whirly, but here's some info. http://www.tractordata.com/lawn-tractors/000/5/2/525-white-112.html , looks like it was made by Jacobsen, still looking around for a possible value, but it's hard to guesstimate :fing32:.
thats (if i remember correctly) and EXTREMELY RARE MACHINE. it is a jacobsen product, jim hit it on the nose. but before white became an MTD/Murray/whatever brand, jake made their machines. whats it worth? running? if it was on ebay, start the bids at 500.
hey....just wanna say...it does run & very nicely at that too..... the guy I got it from says he has a blade for it too.....will get that when he get's it dug outta it's hidin place... the engine rolls over 3-4 revs & it fires up....runs nicely too...sounds like it has a lotta power...

I plan on restorin this one & keep it in my collection

So far my collection has .... a 1963 cubby 100... a 1965 cubby 70 then a Cubby 129 hydro now for the JD round fendered ones..... a complete 60....a complete 70..... 2 complete & all original (one with baby chrome hubs too) 100 models with 3 more for parts....then a complete 110..& one partial for parts......& a 112 good to build from with parts needed to finish.... & a 210 with no deck....
add a MF 7 to the list too & a nice RJ58 Wheel Horse with blade & deck Plus a lil Trustworthy (5 hp Briggs vertical & 24 cut deck) solid rubber on front ...air on rear tires tranny is just Forward....Nuetral .....Reverse then add a A C 218 hydro to the list too
See less See more
Man,check out the front axle on that White!..looks like an I-beam!..:eek:..ruggedest lookin one I've seen in years!..I wouldn't let that tractor go ,unless you get a REAL good amount for it..
This is a Jacobson made unit. Ford, Minneapolis Moline, White all used the same basic unit. Different colors, different decals. The pto clutch on the side is a high dollar item, even to buy used. I would say 250.00 plus for the whole tractor. The odd thing is if it was the MM unit: Yellow and MM decals it would start at around 1000.00. They are a wantin item.
:thThumbsUI like it, looks like a real sweet ride. Ed
Hey Traktrjorj....now I know I did c one of these some long time ago.....was a MM model... I remember it havin the funny rear fenders & also havin a tool box under the seat.....so ran out....lifted my seat....sure enuf....was a tool box there too (just the seat pad part comes up as a box lid,, hinge is on the front of seat...)
ok...jusst got this tonite...a WHITE112 has a 12 hp Kolher cast iron horitizantal engine.. 4 gear tranny (cast iron) (creeper gear is one of the 4)..deck is made of cast Alum.... 12 inch rear tires





I started this tread on 9-16-2010.. I have sold this machine some 3 years ago.. the pics I posted then do not come up for me.. I do see this in my quote..



I may have used the tinypic thing to post them..

on edit.. I did a copy/paste of one of the pics.. it doesn't come up in my postin today.. with the new https thing I now wonder if MTF just lost a lotta pics..
See less See more
All of your pictures appear to be there using IE11 in Full View mode. Must be something on your end.
I wish I could see the picture of it. I'm wondering how similar it is to my White 1650
I just find found it on tractordata. Not similar at all... That one is really cool looking.
3
I just find found it on tractordata. Not similar at all... That one is really cool looking.
I think I found the pics of mine I posted years ago..

Attachments

See less See more
Very Nice Find Whirly.... yes an MM would sell for a little bit more but not by much.... I know somebody... whats My Cut ;)
Very Nice Find Whirly.... yes an MM would sell for a little bit more but not by much.... I know somebody... whats My Cut ;)
I sold it 3 years ago to a guy in Wisconsin the bungy cord u see in my pics was to hold the hood straight.. it got damaged (the aluminum front cowling) when it got hit.. that guy who bought it said he could 'make it look like it never happened'.. I turned down a bid of 2500$$ from a guy who said he wanted to part it out.. this one had a perfect deck on it... some had holes or chunks missin due to rocks .. before I sole it I powered washed the tractor.. the deck paint on the top of the deck looked like factory..
that was really a nice machine. thanks for finding those pictures.
1 - 19 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top