My Tractor Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
98 Posts
Discussion Starter #1
hey guys i had gotten a 16hp v-twin vanguard engine from a 2116 cub cadet with the key switch can anyone PLEASE take a picture of how its wired up or even a drawing i really need this info so can anyone please help

here is my motor wires and a drawing of my key switch


 

·
Registered
Joined
·
8,508 Posts
Moving this to Cub Cadet forum.
 

·
Registered
Joined
·
490 Posts
nitro 1
The wire with the white shield goes to the carb shut done solenoid, needs power to run. The wire with the red shield is the 12 volts from the rectifier. The stud above the wiring harness is the shutdown and goes to ground when you shut it off. PM me and I’ll e-mail you a wiring diagram for a 2165
 
1 - 3 of 3 Posts
Top