My Tractor Forum banner

Trouble shooting a S/G

1439 Views 9 Replies 6 Participants Last post by  GearHeadTom
Does anyone have a page that they can send to me or post it in here on how to do this. The unit was just rebuilt when the engine was done so I am thinging voltage regulator?
1 - 3 of 10 Posts
I don't think it is charging. If I turn the head and tail lights on I see a -10 on the amp meter. Turn them off and the needle goes back to 0.
Thanks Tom. I followed the instructions in the pages that I copied and the regulator is the culprit. All my wiring is good because I replaced it all. Your way worked for you but a test lite only tells you got volts it does not tell how many however. Thanks to everyone for all your help. Happy New Year
1 - 3 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.