My Tractor Forum banner

Trouble shooting a S/G

1435 Views 9 Replies 6 Participants Last post by  GearHeadTom
Does anyone have a page that they can send to me or post it in here on how to do this. The unit was just rebuilt when the engine was done so I am thinging voltage regulator?
1 - 2 of 10 Posts
It's entirely possible the regulator is the problem, but I would recommend you verify your wiring and ignition switch first. Regulators are pricey and if your wiring has a problem, easy to fry.

These are also sensitive to poor grounds, btw.
1 - 2 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top