My Tractor Forum banner

Transmission ?

2568 Views 10 Replies 4 Participants Last post by  rentalken
Have a huskee 21hp garden tractor 2 speed rear end is there a way to check fulid level? What type of oil- grease goes in to it. More info that i have the tranny is a model 618-0301a Thanks Ken
1 - 1 of 11 Posts
32 oz of Shell Darina grease if it's the same as Mtd Snow Plow's. DO NOT USE 90Wt.
Shell Darina grease is more akin to a 300 weight gear oil, so 90 weight is way out of the picture.

Shell Dalrina will be hard to find; it's basically like a lithium grease except with clay instead of lithium. I'm sure any marine-grade grease would be fine, or at least that's what I used in mine.
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top