I hope you have solved this by now. I had a similar problem with my TC25D. It turned out to be the neutral saftey switch, located under the fender connected to the shifter. I had to bend the bracket holding the switch in place so it would activate again. A stick or pc of brush had evidently knocked it out of position.
TC25 - Safety Start Relay? (where is it)
I was doing a little brush work this evening with my TC25. Jumped back on and she wouldn't restart. No key click, no turning over. Good indicator of power and glow plug heat.
Checking at the starter, the solenoid isn't being triggered. I wasn't using the PTO, just the FEL. Per the manual, there is a "safety start relay" which prevents the starter from turning unless the PTO and mid-PTO (not equipped) are both OFF and the transmission is in neutral.
I rocked the PTO, transmission.. No change.
I ended up hotwiring the solenoid to get the tractor back into the barn.
I'd like to be able to check out the safety start relay itself... Only I have absolutely no idea where the darn thing is.... Anyone have an idea or suggestion?
Checking at the starter, the solenoid isn't being triggered. I wasn't using the PTO, just the FEL. Per the manual, there is a "safety start relay" which prevents the starter from turning unless the PTO and mid-PTO (not equipped) are both OFF and the transmission is in neutral.
I rocked the PTO, transmission.. No change.
I ended up hotwiring the solenoid to get the tractor back into the barn.
I'd like to be able to check out the safety start relay itself... Only I have absolutely no idea where the darn thing is.... Anyone have an idea or suggestion?
1 - 1 of 4 Posts
1 - 1 of 4 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
My Tractor Forum
A family friendly forum community dedicated to all Tractor owners and enthusiasts. Come join the discussion about specifications, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
