My Tractor Forum banner

So I've been welding...

1629 Views 8 Replies 7 Participants Last post by  bontai Joe
As some of you may know, I've been trying to teach myself how to weld competently. I had gotten to the stage where I could stick two pieces of metal together & actually have them stay with a good deal of stress on them, but dang, the welds were ugly! I could make things presentable with the grinder, but I also knew the "pretty" welds were stronger because they were done correctly. So anyway, last weekend I got a visit from a family friend who is a welder by profession & he spent a little time showing me how to do things the right way. Wow, what a difference a little instruction makes! Below are some of the things I made for the gt-2055. There's a drawbar/implement mount, a carryall with removable tailgate, and a weight box. The weight box was the toughest to make because I'd never welded the thinner stuff before. But my friend brought his nice Lincoln mig along with him, and it was a joy to work with. Hope you enjoy the pics...

Iron Metal Furniture Gas Steel

Iron Furniture Metal Mesh Table

Metal Gas

Machine Automotive tire Wheel Vehicle Metal

Automotive exterior Bumper

Steel Metal
See less See more
1 - 1 of 9 Posts
Check out this thread here:

There is a lot of welding knowlege here and you can submitt your pics for advise on what you are doing wrong and what you are doing right.
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.