My Tractor Forum banner

Snowblower...will it fit? (PICS)

2337 Views 6 Replies 6 Participants Last post by  cityboy2977
Hello again everyone...

I finally have a lead on a snowblower for my Allis-Chalmers 920. I was hoping some of you with better trained eyes then mine might be able to tell from the pictures, whether or not this blower and hitch will work with my machine? Thanks in advance for any replies!


See less See more
1 - 2 of 7 Posts
I'm pretty sure that will work. It's complete....there's nothing missing that I can see. A 900 series does not use a subframe like later Landlords and such. That hitch mounts right up to your Allis, and you'll need the 147" belt (1666798) that runs off your mid PTO.

I believe you need blower #1690548 and hitch #1690557, which resembles what you have. Blower might be a bit different, but the hitch is the important part.

Check out this...
I apologize...I'm not seeing the second pulley on the hitch. Kevin's right...if there's two pulleys, you need the front PTO on your machine.

Kevin...can't you convert the two pulley version to a single pulley and run off the mid PTO? Just thinkin out loud...
1 - 2 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.