My Tractor Forum banner

snow cab

1789 Views 10 Replies 8 Participants Last post by  cityboy2977
is finally on ! after 2 days of work.
what a royal PITA. it didnt come with any corner posts or the pieces of metal to make it stick out at the feet, so i had to make my own from a few pictures i got from pulltilbroke. thanks man.
made everything out of galvanized conduit.
and without corner door hinges. this was the biggest problem for me.
just hanging the doors took me most of the day and they still arent 100%.
but it will keep blowing snow and the wind out of my face.
i really didnt know what i was in for before i bought it.

See less See more
1 - 3 of 11 Posts
the reason you have to reach out to rotate the chute is because,
for every 1 inch you raise the blower the handle moves 2 inches. would be counter productive to make a slit in the material that large.
when he gets back from hunting i will get some pics of Burntime's electric chute rotator. my next mod.
is that a winch on the front for raising and lowering the blower? If so nice mod
1 - 3 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.