My Tractor Forum banner

Sears 12/6 starting problem

2514 Views 5 Replies 6 Participants Last post by  mcavvie
I have a Sears 12/6 tractor, that i am having a starting problem with. I hooked in a battery, turned the key and got nothing. Both the solenoid and The starter work as i have already tested the starter, and the solenoid is brand new and wired correctly. All the fuses are good too. I didnt even get any reading form the amp gauge that it was drawing power when you first turn the key to on. Can someone post a wiring diagram for this tractor, i really want to get this thing running. Thanks!
1 - 1 of 6 Posts
When you installed the new solenoid did you re connect the positive wire from the ignition switch to the solenoid lead? Because if you are turning the key and nothing happens that means the solenoid coil isn't being energized. There is a much smaller third lead hook up that you hook the ignition wire to. - Brad
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.