My Tractor Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
157 Posts
I have a High-density polyethylene (HDPE) or polyethylene high-density (PEHD) board under my SB48 snowblower for the cutting edge. I have seen them used on 4x4 truck snowplows as cutting edges also. This will be the 6th season of use and there has not been much wear on the board. It sells at http://www.mcmaster.com for around $15/foot depending on thickness
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top