My Tractor Forum banner
1 - 2 of 2 Posts

·
life is good
Joined
·
1,048 Posts
Lower your bucket and retract all of your cylinders. Also lower your 3pt, this should get as much of the oil out as possible. There is really no way to get it all out, but this should help get the bulk of it out. Good luck.
 

·
life is good
Joined
·
1,048 Posts
No problem, but as the others said there is really no reason to go to the extent you're considering. Also don't forget if you go that route there will be a bit more air to get out. Not saying it won't bleed out easily, it might just tale a bit longer to get it to cycle out. Plus I personally wouldn't drain the pump if the oil is in good condition with no water in it.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top