My Tractor Forum banner

Quick advice needed, inspection of used X300 with 210hours

1437 Views 12 Replies 7 Participants Last post by  meburdick
I'm going to look at a used 2009 X300 tonight. It has been used to mow 3 arces and to push a snow blade in the winter. Machine looks mint in the pictures and seller claims the machine was babied, stored in doors from new, and always serviced at one of two dealers in the area. No paperwork on that though as she is selling due to divorce and and the papers are with hubby. The machine is her's though. (I hope)

The concern from what I've read is the K46 tranny. From what I read, towing loads and working the machine on hills will kill that tranny, I would imagine pushing snow would too although the cold ambient temperatures might save it. I suspect the failure is caused by heat right? 210 hours is a tad more than I wanted, I feel like the machine could go for years or die next week, I've read about machines dying at 100 hours, but then you have no idea what they were being used for.

Any pointers on what to inspect for and thoughts on the future longevity of that tranny would be much appreciated. For what it's worth, I'd expect to put 25 hours on it a year, cutting slighty sloping lawn....
1 - 1 of 13 Posts
Tuff Torq does recommend full synthetic 5W-50. Through some personal research, Amsoil recommends their ARO 20W-50 for any Tuff Torq application calling for 5W-50. Just throwing that our there as an alternative choice.

Sent from the MTF Free App
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.