My Tractor Forum banner

Pony carb float level ? giving me grief

897 Views 3 Replies 3 Participants Last post by  DJ54
I've cleaned out the gas tank on my "new" Pony, replaced the sediment bowl and line to the carb with new stuff and the Marvel Schebler carb leaks gas through unless I turn the gas off at the sediment valve when the tractor is not running. I have had the carb apart and all looks well inside. The needle & seat seem fine. I am going to experiment with minor adjustment in the float level and not opening the valve on the sediment bowl fully, to see if that will solve the problem. Any suggestions? Thanks.
1 - 1 of 4 Posts
Are carb rebuild kits available for your application? It sure would be nice if you could just replace the needle and seat to fix the problem. The shut off valve is great for longer durations of down time but if you plan to run the tractor often it would be nice to get on and go without fussing with side panels and opening the fuel supply.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.