My Tractor Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
242 Posts
When you do get the correct roll pin, it has to be driven in to the same depth on both sides. It needs to be clear of the outer collar on both sides to let the ORC spin freely.

If you have an actual TSC store where you purchased it, I'd go back there and tell them it came with no roll pin. They should take one out of another ORC and give it to you.

Or at least you can get the correct size you need from another ORC that has the roll pin.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top