[alexleblanc]

nice job, i bought the factory one and didn't like the way they where wired with the aux lightsd either, i rewired them and ordered up 4 LED worklights, 2 forward and 2 for the rear so i can see what i'm doing when i clear the driveway as well. where did you take the 12v from? i used a spare 12v source from the fuseblock (15a).

 

[alexleblanc]

seems to me you should only be running 120w's worth of lighting on that 10a circuit?

 

[alexleblanc]

Thats probably true. 120/12 =10. Only other option is running an inline fuse from battery. I dont know where else to get power.

I will change the feed if I have issues. I thought about swapping out the fuse to 15 but dont know how heavy the circuit is feeding it.

honestly, you'll probably be fine running a 15a fuse at this stage, but i'd suggest getting a few LED worklights at some point, then you'll end up with lower wattage and similar or better light output. I was maxed out on mine for wattage on my circuit so that's why i decided on LED units.