My Tractor Forum banner

Need to find/buy parts for a scatback 430 loader

7K views 18 replies 9 participants last post by  trickertreat69 
#1 ·
Hello all, my name is Anthony. I picked up a CASE/Davis Manuf. Scatback 430 mini front loader. I have been trying to obtain a supplier or an online site where I can buy parts for it. I have been having problems finding either. I wouldn't mind finding a salvage yard either is that's how I have to obtain parts. I'm located on Long Island. I am looking for a good amount of parts too, so that doesn't help. I'm becoming optimistic that I'll find them or even most of them at this point. I have a parts catalog for the machine with part numbers, but I am not getting any hits anywhere when I use these numbers. I am assuming these numbers have been discontinued if they are even still available and other numbers have been put in their place through another manufacture or distributor and that's why I'm not having any hits. I sent the below list to a gentlemen yesterday in Buffalo who said he may be able to help. Keep in mind these numbers aren't part numbers they are the item number that are being referenced from the parts catalog I have. If I can, I'll upload the parts catalog as well.

See the list of the items I am interested in below:

Page 5- Items, 4, 5, 6, 7, 8, 9, 10, 12, 13, & 14
Page 7B- Items, 14, 18, 23, 24, 25, 26, 28, 29, 30, 31, 32, C-D for item 32, & 34- Why all the different size thrust washers? do I need all three or do I only need one size x2EA for this particular machine ?
Page 11- Items, 12, 28, 29, 30, 31, 32, 33, 41, 56, 59, 60, & 61
Page 11B- Items, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 33, 34, 35, 36, 37, 38, 39, & 40
Page 17- Item, 14
Page 19- Items, 10, 11, 12, & 35: Note: See page 25 items. If I can get the parts listed on this page then I can rebuild the current steering valve that works. Its just the male and female splines that are damaged on the steering wheel and valve stem.
Page 23- Item, 40
Page 25- Items, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, & 30. Item 20, what is this part? Is this the female end of the spline socket for item 10 to fit into? It looks like that too me, if that is the case, then I need one of those because that is whats actually damaged on mine.
Page 35- Items, 3, 4, 5, 6, 7, 8, 9, 11, 13 & 23
Page 11 from operators manual- See attached document. I am also looking for the entire oil-bath type cleaner assembly off of the intake manifold. I need the filter cannister, the filter element, & oil cup. On the other side of the intake manifold, there is also a plastic black cap, it almost looks like a grease tube cap. See attached pictures. What should be here in its place. If I remove the plastic cap you see into the manifold.
 

Attachments

See less See more
5
#4 ·
It looks like your in the same boat as I am, I have a old Davis trencher that there is no longer parts available. Hyd hoses you can have made or buy at alot of places, the orbital valve should have a tag on it with a name and part no. Hyd shops that sell them should be able to get the parts.

The air filter i'd just change it over to a regular newer style filter. I's hard to see alot of the things you need because I can't get the pictures big enough to read.

https://www.colemanequip.com/parts/...ARIABLE-DISPLACEMENT-PUMP-DIESEL-MODELS-0DeU/ Check with these people maybe they can help you.
 
#5 ·
Here are the part numbers from the part catalog below.

H594556-Seat
H549691-Seat mounting plate
H583591-Seat Bracket
H581264-Seat support
H159574-Bushing for Pivot pin
H182634-Pivot pin
H263913-Thrust washer (.032)
H164962-Thrust washer (.250)
H173385-Thrust washer (.188)
H261891-Bolt special
H261370-Brake disc
H591818-Parking brake Asm
H264218-Extension brake arm
H315598-Spacer
H289116-Bracket
H603902-Bracket pump centering
H603910-Spring bracket
H603928-Spring bracket
H289124-Screw adjusting
H756932-CPSS (1/4" - 20x12" -Self locking)
H303842-Spring
H289785-cam & arm pump
H756361-Shoulder bolt
A55882-Switch Neutral
H256701-Cap steering wheel
H256693-Steering wheel
L33715-Special nut for steering wheel
H195149-fan motor-heat exchanger
181701-cap screw 12 point 5/16 x 5/8 NC
L30879-Column control
L30880-Shaft control
L30881-Bearing assembly control column
F53335-Ring retaining
L30882-Ring retaining
A72029-Seal quad ring
L30883-Bushing cap locator
147587-Seal O-ring
147553-Seal oil
L30886-Spool assembly control
L33715-Nut control shaft 13/16 NEF jam
H588954-Exhaust port adapter
H262550-Exhaust tube clamp
H245175-Exhaust tube
H257634-Muffler bracket
H046177-Muffler
H588806-Muffler clamp
H258111-Muffler clamp spacer
H256735-Throttle bracket
H588582-Throttle control
H164970-Alternator drive belt
 
#6 ·
I hadn't seen the term "Scatback 430" in a lot of years so I had to sign on for a look.

Back in the mid '80s I bought a used Scatback 430 and sweeper attachment with the intention of starting a small business of my own. Word got back to work that I might leave and it got me a promotion instead.

Subsequently, just used the machine as a loader around the property and eventually sold it to a snowplow company to load sand into their trucks.

The Dealer carried parts for it back then and new cab windows were cut by a local glass company. Can't remember the exact year, but we sprayed it in the original earlier Case Orange color ourselves.

That is a long, probably pricey, list of parts. Are you simply returning the loader to service, or doing a full restoration on it?
 
#7 ·
Good evening Larry. This is the first time I came across this type of machine myself. It’s definitely a unique machine and is perfect for what I need it for on my property. The gentlemen who owned it before me had it for 32 yrs. It seems the last 10 or so years the machine got away from him and now needs some TLC. I’m also the type of person that likes to do things with OEM parts when possible for any project I’m working on. I also figured this list could also get me in the dog house with my wife If they are all available lol. But I am looking all over and trying to find whatever I can to bring her back to life. I’m in the process now of stripping it all down, cleaning all the years of oils and grim off of it, and removing all the broken pieces. I’m going to blast all all the paint off and repaint as well, put new tires, and hopefully replace as much as I can with new or used better parts. Thanks for the post. Maybe once I’m all completed with it, I’ll post some progress and final pics.
 
#8 ·
Hello all, my name is Anthony. I picked up a CASE/Davis Manuf. Scatback 430 mini front loader. I have been trying to obtain a supplier or an online site where I can buy parts for it. I have been having problems finding either. I wouldn't mind finding a salvage yard either is that's how I have to obtain parts. I'm located on Long Island. I am looking for a good amount of parts too, so that doesn't help. I'm becoming optimistic that I'll find them or even most of them at this point. I have a parts catalog for the machine with part numbers, but I am not getting any hits anywhere when I use these numbers. I am assuming these numbers have been discontinued if they are even still available and other numbers have been put in their place through another manufacture or distributor and that's why I'm not having any hits. I sent the below list to a gentlemen yesterday in Buffalo who said he may be able to help. Keep in mind these numbers aren't part numbers they are the item number that are being referenced from the parts catalog I have. If I can, I'll upload the parts catalog as well.

See the list of the items I am interested in below:

Page 5- Items, 4, 5, 6, 7, 8, 9, 10, 12, 13, & 14
Page 7B- Items, 14, 18, 23, 24, 25, 26, 28, 29, 30, 31, 32, C-D for item 32, & 34- Why all the different size thrust washers? do I need all three or do I only need one size x2EA for this particular machine ?
Page 11- Items, 12, 28, 29, 30, 31, 32, 33, 41, 56, 59, 60, & 61
Page 11B- Items, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 33, 34, 35, 36, 37, 38, 39, & 40
Page 17- Item, 14
Page 19- Items, 10, 11, 12, & 35: Note: See page 25 items. If I can get the parts listed on this page then I can rebuild the current steering valve that works. Its just the male and female splines that are damaged on the steering wheel and valve stem.
Page 23- Item, 40
Page 25- Items, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, & 30. Item 20, what is this part? Is this the female end of the spline socket for item 10 to fit into? It looks like that too me, if that is the case, then I need one of those because that is whats actually damaged on mine.
Page 35- Items, 3, 4, 5, 6, 7, 8, 9, 11, 13 & 23
Page 11 from operators manual- See attached document. I am also looking for the entire oil-bath type cleaner assembly off of the intake manifold. I need the filter cannister, the filter element, & oil cup. On the other side of the intake manifold, there is also a plastic black cap, it almost looks like a grease tube cap. See attached pictures. What should be here in its place. If I remove the plastic cap you see into the manifold.
i have a complete second scatback 430 with good spare engine, i may sell it call me if you want to talk about it before i list it..208 215 1591 darryl
 
#9 ·
Hello all, my name is Anthony. I picked up a CASE/Davis Manuf. Scatback 430 mini front loader. I have been trying to obtain a supplier or an online site where I can buy parts for it. I have been having problems finding either. I wouldn't mind finding a salvage yard either is that's how I have to obtain parts. I'm located on Long Island. I am looking for a good amount of parts too, so that doesn't help. I'm becoming optimistic that I'll find them or even most of them at this point. I have a parts catalog for the machine with part numbers, but I am not getting any hits anywhere when I use these numbers. I am assuming these numbers have been discontinued if they are even still available and other numbers have been put in their place through another manufacture or distributor and that's why I'm not having any hits. I sent the below list to a gentlemen yesterday in Buffalo who said he may be able to help. Keep in mind these numbers aren't part numbers they are the item number that are being referenced from the parts catalog I have. If I can, I'll upload the parts catalog as well.

See the list of the items I am interested in below:

Page 5- Items, 4, 5, 6, 7, 8, 9, 10, 12, 13, & 14
Page 7B- Items, 14, 18, 23, 24, 25, 26, 28, 29, 30, 31, 32, C-D for item 32, & 34- Why all the different size thrust washers? do I need all three or do I only need one size x2EA for this particular machine ?
Page 11- Items, 12, 28, 29, 30, 31, 32, 33, 41, 56, 59, 60, & 61
Page 11B- Items, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 33, 34, 35, 36, 37, 38, 39, & 40
Page 17- Item, 14
Page 19- Items, 10, 11, 12, & 35: Note: See page 25 items. If I can get the parts listed on this page then I can rebuild the current steering valve that works. Its just the male and female splines that are damaged on the steering wheel and valve stem.
Page 23- Item, 40
Page 25- Items, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, & 30. Item 20, what is this part? Is this the female end of the spline socket for item 10 to fit into? It looks like that too me, if that is the case, then I need one of those because that is whats actually damaged on mine.
Page 35- Items, 3, 4, 5, 6, 7, 8, 9, 11, 13 & 23
Page 11 from operators manual- See attached document. I am also looking for the entire oil-bath type cleaner assembly off of the intake manifold. I need the filter cannister, the filter element, & oil cup. On the other side of the intake manifold, there is also a plastic black cap, it almost looks like a grease tube cap. See attached pictures. What should be here in its place. If I remove the plastic cap you see into the manifold.
 
#11 ·
i have a complete scatback 430 with a spare hatz diesel engine..all there minus the rops ..machine has been sitting but should run again with minimal work..darryl 208 215 1591
[/QUO
i have a complete scatback 430 with a spare hatz diesel engine..all there minus the rops ..machine has been sitting but should run again with minimal work..darryl 208 215 1591
still got the second machine?
 
#14 ·
Hello Anthony,
My name Is Jeroen and I am from the Netherlands. Since 2 years I own a Scatback 430 from 1973, even after all these years she runs great.

The Dutch government changed some laws for loaders, skidders, tractors and so on.
If they drive on public roads they all need a license plate on it, to register and to receive the licenseplate I need the VIN vehicle Identification Number for it. Unfortunately I cannot find mine..
Do you have any idea where this number is located?
Thank you already very much in advance.
Looking forward to your reply.
With kind regards, Jeroen
 
#16 ·
Thanks a lot!
True, I know the post is already 3 years old..
But this post was the only info I could find on the internet about the Scatback430. It seems that there is hardly information available?..
Do you have any idea where I could find the VIN location on the Scatback?
Many thanks already

regards, Jeroen
 
#19 ·
I'm currently rebuilding my 1974 Q52 Scatback 430. I have created a facebook group where we can exchange our experiances. I am currently replacing the pivot pin and bushings. While I have it apart, I am rebuilding the drive shaft and driven sprocket. I am posting any interchangeablye parts that I have found, and posting videos of modifications I do to parts that I found that are close. You can search for scatback 430 on facebook. or here's the link

.
 
Top