My Tractor Forum banner
1 - 1 of 19 Posts

· Registered
147 Posts
Well I had the same problem when I installed my new brass float also. If you look at it closely you will see it is very flimsey, I found 1/8'' did not work but 1/4 '' works great. Brass is just too thin as you can see, just use 1/4 '' and you will be fine. Remember they are made in china now.
1 - 1 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.