My Tractor Forum banner

Modification Dream

1502 Views 7 Replies 6 Participants Last post by  Loren Holm
I have a 49 snowblower on my 318. I also have a 445 with a quick hitch. I have the urge to modify the 49 to fit the 445 and the quick hitch. My question is does anyone know what is the rpm speed of the front pto of the 445 and what is the rpm speed of the shaft of the 49 with the 318 would be? Are they the same speed? If they would be the same or at least very close, I am thinking of replacing the pully with a PTO .
1 - 3 of 8 Posts
Thank you for that information.
Thanks for that information. I haven't seen that info before. With the coments I received, I think it will work. Knowing the speeds, I can always use a formula and change the sprocket on the auger.

Thanks a lot!!
1 - 3 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.