My Tractor Forum banner

Measurement needed on front weight rack part G series

2K views 14 replies 7 participants last post by  Jet-A 
#1 ·
Diagram Text Plan Design Engineering


Part labeled 13
I want to fabricate it and need measurements please!


Sent from Steve of GAAFK
 
See less See more
1
#2 ·
Steve, I believe that part is still available from GRAVELY, at least is was a fairly recently when I built my front mount dethatcher. However if you want to make them, I can measure one and send you the info.

http://www.jackssmallengines.com/searchresults.cfm?cx=008737122150761418589%3Ac24nnqwh7co&cof=FORID%3A11&q=040642&sa.x=0&sa.y=0

Not real expensive either, that's why I just bought them to make a bracket for my dethatcher. Note the red parts:

[URL=http://s1002.photobucket.com/user/carrollhome/media/DSC00812.jpg.html][/URL]

[URL=http://s1002.photobucket.com/user/carrollhome/media/DSC00803.jpg.html][/URL]

Let me know how you make out,

Sheldon
 
#5 ·
Link would not work for me.....how much were they?



Steve, I believe that part is still available from GRAVELY, at least is was a fairly recently when I built my front mount dethatcher. However if you want to make them, I can measure one and send you the info.



http://www.jackssmallengines.com/se...4nnqwh7co&cof=FORID:11&q=040642&sa.x=0&sa.y=0



Not real expensive either, that's why I just bought them to make a bracket for my dethatcher. Note the red parts:



[URL=http://s1002.photobucket.com/u...m/albums/af147/carrollhome/DSC00812.jpg[/IMG][/URL]



[URL=http://s1002.photobucket.com/u...m/albums/af147/carrollhome/DSC00803.jpg[/IMG][/URL]



Let me know how you make out,



Sheldon




Sent from Steve of GAAFK
 
#3 ·
Shucks, I know that if I needed those, I'd just buy them at that price. That's pretty good for Gravely these days.
 
#9 ·
PM sent. I can mail you a tracing also just let me know. Jason
 
#13 ·
Those are old p/n 40324 LH and 40325 RH list price $44.70 each. I would have a hard time paying more than $50 for a used pair. Jason
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top