[m25pa]

i got an old seeder now id like to convert 3pt any guys take a min to measure the location of the 3pt bar hope this picture will help thanks a bunch!!!!

 

[el_simonito]

I'll have to pull mine out tomorrow, but I can get those measurements! Perhaps someone sooner can help if time is of the essence?

Sent from the MTF Free App

 

[m25pa]

na times not an issue thanks !:thThumbsU

 

[m25pa]

Bump

Sent from the MTF Free App

 

[4Suburbans]

I think a couple of pictures will allow you to locate by eye where it has to go. You can use the trailing edge of the seed box to reference it. On my planter that measures 9.5" from front of rounded bar stock to centerline of the lift pins.

 

[Plowthesidewalk]

Who made your seeder? Is it a Brinly?

 

[m25pa]

Its a sears / david bradley and thanks for the info!

Sent from the MTF Free App

 

[skills4lou]

I've got the same measurements on mine as 4Suburbans'.

I considering using mine this year just to try it out, but decided with only 75' rows it's probably a bit of overkill. I was thinking it'd take more time to change out the seeds/plates than it would to just use the winged weeder to make little trenches.

I may try it with some sunflower seeds around the chicken yard though...