[krsword]

:howdy:

Does anyone know of a mower deck that may be available for any one of these tractor models? The tractor I need the deck for is a 502.25910.

**********************************************

Model: 502.25089 36" cut
502.25084 42" cut
LT 10 Lawn Tractor

Source: Murray Ohio Mfg.

++++++++

Model: 502.25120

ST 8 Garden tractor

Source: Murray Ohio Mfg

++++++++

Model: 502.25130

ST 10 Garden Tractor

Source: Murray Ohio Mfg.

**********************************************

Not sure of the decks model #'s but they would be the correct hookup needed.

Thanks.

:hide:

:dunno:

 

[grem304]

might have one, not sure all the brackets are on it. check pm

 

[krsword]

might have one, not sure all the brackets are on it. check pm

Thanks for checking grem304.

The mounting and lift kit is NOT the scissor kind.

Two long arms that reach the front axle and two link plates on the lift rod of the deck that connects to cotter-pinned hang rods from the tractor frame. I'll see if I can get a clear picture for you.

:hide:

:dunno:

 

[krsword]

Okay, here is a couple of pics of the deck on the tractor.

Thanks :thThumbsU

 

[craftsmanmowerfreak]

my boss has one but we are too far awy

 

[krsword]

my boss has one but we are too far awy

Hi craftsmanmowerfreak,

Is it something that he wishes to part with? Doesn't have to be this month or next month, either.

I may be heading to Indianapolis near the end of October or beginning of November. Side trip wouldn't be out of the question.

:hide:

:dunno:

 

[BOSOX]

I'm going to copy this over to the Murray Forum and see if they might be able to help you locate a deck.

 

[farmerall]

I have one off a sears st10 similar to the tractor in the picture. I will have to measure the deck because I want too say it's a 36 inch deck but I may be remembering wrong. I don't know if there was more than one option for deck size on this model tractor. The deck isn't in bad shape but it's not the greatest either, it has a small hole in the back of the deck that looks to be easily fixable. If you are interested I will give you the deck for free otherwise it is going to go in my next load of scrap. Also I am near Pittsburgh pa