[sspbass]

I've got an International 560 that I just put a cab on for blowing snow in the winter. I need to mount some lights to see forward and more importantly backwards. I'm thinking two on the front, two on the back pointing out and two on the back pointing down so I can see the edge of the blower. Can you guys recommend any good lights that won't break the bank?

 

[Danco]

I've got an International 560 that I just put a cab on for blowing snow in the winter. I need to mount some lights to see forward and more importantly backwards. I'm thinking two on the front, two on the back pointing out and two on the back pointing down so I can see the edge of the blower. Can you guys recommend any good lights that won't break the bank?

They seem to be adequate enough while not very expensive.

http://www.gemplers.com/product/G50830/Rubber-Tractor-Implement-Light

http://cgi.ebay.com/ebaymotors/PAR-36-EQUIPMENT-TRACTOR-RUBBER-WORK-LIGHT-HEADLIGHT-EM-/300583324951?pt=Motors_Car_Truck_Parts_Accessories&hash=item45fc298d17

 

[CADplans]

Careful with the number of these lights, your charging circuit might run out of AMPS.

 

[sspbass]

They seem to be adequate enough while not very expensive.

http://www.gemplers.com/product/G50830/Rubber-Tractor-Implement-Light

http://cgi.ebay.com/ebaymotors/PAR-36-EQUIPMENT-TRACTOR-RUBBER-WORK-LIGHT-HEADLIGHT-EM-/300583324951?pt=Motors_Car_Truck_Parts_Accessories&hash=item45fc298d17

Are these the same light output that the original bulbs have or are they upgrades?