I have an LA 145 that is driving me crazy and I'm hoping someone can point me in the right direction.
Here is the problem. I got this tractor which had been sitting a while and I got it basically from an estate sale. The engine has 48 hrs and everything is in great shape. Before I got it the son of the previous owner tried to get it to run but got no where starting it. I cleaned up the carb and was able to get it to run a bit by priming it running gas down the intake however it was obvious the o-rings where dried out. Rather than just buy the o-rings I opted to buy a new carb (just a few dollars more. It now runs good (maybe a sputter here and there) but the only way to start it is to pour gas in the intake. Once I've done that it runs and I can restart it. Once it sits over night I have to prime it again.
So in the interest of saving time: I've checked the gas lines, changed the fuel filter, even tried an electric fuel pump.
There is gas in the float, but it won't start. I admit I don't have much experience with these Briggs 2 cylinders and these carbs are new to me.
Any suggestions, things maybe I missed?