My Tractor Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
Hey guys. I was wondering if any of you had the 50" front mount snowblower and the Front end loader for their kubota's. I am wondering what it will take to switch back and forth. I am hoping to use both during the winter.
 

· Administrator - We’re all friends here
Joined
·
17,127 Posts
The BX1860 uses the same blower. It comes off in about 10 minutes, including the quick hitch. The loader goes on in about 5-10 minutes, depending on how proficient you become. It will come off in 5 minutes and the blower and quick hitch mount back up in about 15-20 minutes if everything lines up. I mount the blower once a year so I'm not as quick as some. I can't imagine using the loader if you have the blower unless you have insufficient room to throw the snow. :)
 

· Administrator - We’re all friends here
Joined
·
17,127 Posts
I'm north of Albany. Yes, the loader will work well for snow piles. Hope you have a warm, dry place to make the switch. You have to get down to remove the drive shaft. :1221:
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top