My Tractor Forum banner

JD MX8 Burch replacment blades

1042 Views 4 Replies 2 Participants Last post by  nose
Just purchased a JD MX8 mower with a Burch wet blade system from the US fish & game. I need replacement blades which are 52" long, 4" wide and 5/8" thick solid 1 piece with a 1-1/2" square hole in the center. Giving JD the serial number they say no MX8's use a solid straight blade or the square hole. Anybody know where to get blades?
1 - 5 of 5 Posts
Do the square holes match up to a square bolt? If the bolt is round, go with a blade with round hole.
The square hole in the blade is where the square shaft from the gear box passes thru the blade.
Originally from Wilkesboro NC, that's about all i got from my search, good luck. Seems DOT used them on right of ways in several states, could possibly be a source for info or parts.

Just found out that Diamond Mowers bought Burch wet blade. Very helpful parts department - they have blades. Thanks for your interest.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.