screwed in
Dan
Dan
JD 425 tranny fill-Dip stick?
I have drained the fluid and installed a fresh filter. The tranny fill hole under the seat has a screw in dip stick. My question is, when filling, do I check the fluid level with the dip stick screwed in or resting on the top of the fill hole threads?
Nope, no manual yet.......
Thanks
Nope, no manual yet.......
Thanks
1 - 13 of 13 Posts
Actually, i think its resting on the top...at least i'm pretty sure that's what is says in the manual on my 455
Don't screw it in to check , the manual says - rest it on top of the tube ...
I used to own a 445 , same Transaxle ...
Later,x595
I used to own a 445 , same Transaxle ...
Later,x595
Hi,
I am new but own a 425 and just looked up in the owners manual...it says in CAPS do not screw it in...let it rest on the top of the fill tube to check the level.
I am new but own a 425 and just looked up in the owners manual...it says in CAPS do not screw it in...let it rest on the top of the fill tube to check the level.
Ok, gotcha. I'll go with the consensus and check the fluid level with the dip stick resting on the top of the fill tube.
Thanks much.
Thanks much.
You can download your manual from JD's web site ... By the way
:Welcome1: !!!
Later,x595
:Welcome1: !!!
Later,x595
Please point me in the right direction to do this. I have been able to download pfd Maintenance Reminder Sheets with part numbers and such but no manuals.You can download your manual from JD's web site
On my 1997 425 I let the dipstick rest on top per the manual. slkpk
Hi mjac and Grateful11 ,Please point me in the right direction to do this. I have been able to download pfd Maintenance Reminder Sheets with part numbers and such but no manuals.
Here is the directions I used and stumbled upon ...
1.) Go to JD's Homepage ...
2.) At the bottom of the page go to (About Our Site) ...
3.) Scroll down to (Residential Products & Equipment) and go to Operator's
Manuals ...
4.) Go to (Search For Operator's Manuals) ...
5.) Put in 425 , hit search ...
6.) They do say they have a limited availability of older models , but there is
a manual for the Serial # 070001- ...
Later,x595
Ah, good deal. Thanks!Hi mjac and Grateful11 ,
Here is the directions I used and stumbled upon ...
1 - 13 of 13 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
My Tractor Forum
A family friendly forum community dedicated to all Tractor owners and enthusiasts. Come join the discussion about specifications, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Top Contributors this Month
View All
MARK (LI)
433 Replies
PA318Guy
367 Replies
Ariens93GT20
322 Replies
Recommended Communities
Join now to ask and comment!
