I would say a dose of SeaFoam would not hurt anything. Might clean up a few years worth of varnish and sediment.
Is this the proper place?
I just bought an '83 Honda 200E ATC and I'm looking for some help.
It runs ok, idles a bit high as the clutch is always engaged it seems like. It's been sitting a while but started right up on the old gas and ran... so-so... Now it will run fine though with new gas.
I don't know how to work these carbs. How do I lower the idle speed?
Also it wants choke---full choke to run. I'm guessing it's running lean. Where's the mixture screws to adjust the mixture?
I cleaned the carb this morning and it made a difference, but still having the above issues.
I will get a video of it in the next hour or so, got some other things to do first.
:thanku:
It runs ok, idles a bit high as the clutch is always engaged it seems like. It's been sitting a while but started right up on the old gas and ran... so-so... Now it will run fine though with new gas.
I don't know how to work these carbs. How do I lower the idle speed?
Also it wants choke---full choke to run. I'm guessing it's running lean. Where's the mixture screws to adjust the mixture?
I cleaned the carb this morning and it made a difference, but still having the above issues.
I will get a video of it in the next hour or so, got some other things to do first.
:thanku:
Attachments
1 - 1 of 10 Posts
1 - 1 of 10 Posts
