installing 48" deck on X320 problem

11141 Views 13 Replies 7 Participants Last post by Markcuda, Oct 9, 2010

bvollrath

Discussion Starter · Oct 9, 2010

I am re-installing the deck after installing the mulch kit in it. I think I can figure everything out except for one detail. I do not know how to unlock the deck lift pedal. I did lock it by moving the pedal all the way to the back of the lawnmower. I tried pushing forward on the pedal, but it will not unlock. The height adjustment is set for the lowest position. I cannot see anything that is binding. This is my first time removing/installing a lawnmower deck. So I am a newbie at this. Please help.

Thanks,
bvollrath

Save

1 - 4 of 14 Posts

bvollrath

Discussion Starter · #4 · Oct 9, 2010

Yes, I have the manual, but it is not very helpful. My wife figured it out. You have to pull back on the handle while pushing down on the hand lever to release it. It was a lot of futzing around, but I got the deck on?

The manual also mentions putting the draft arms that connect to the deck into the "transport" position. Do you know how to do this? I might have to do that when I have the snowblower on in winter. Thanks.

bvollrath

Save

bvollrath

Discussion Starter · #7 · Oct 9, 2010

The arms came installed. I haven't removed them. It seems like the simple things sometimes baffle me. How do I put these arms into the transport position?

Save

bvollrath

Discussion Starter · #11 · Oct 9, 2010

That makes total sense now. Sometimes it takes me a while to understand stuff. I wish the manual explained things more. It brushes over steps like I am suppose to understand what they want me to do. Thanks for everyone' help.

bvollrath :thanku: :thThumbsU

Save

1 - 4 of 14 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month