My Tractor Forum banner

installing 48" deck on X320 problem

11153 Views 13 Replies 7 Participants Last post by  Markcuda
I am re-installing the deck after installing the mulch kit in it. I think I can figure everything out except for one detail. I do not know how to unlock the deck lift pedal. I did lock it by moving the pedal all the way to the back of the lawnmower. I tried pushing forward on the pedal, but it will not unlock. The height adjustment is set for the lowest position. I cannot see anything that is binding. This is my first time removing/installing a lawnmower deck. So I am a newbie at this. Please help.

Thanks,
bvollrath
1 - 1 of 14 Posts
Just a tip for you. I have had a time trying to put the J pins back in the lift arms. You have to square the deck off as perfectly as possible and then as you get close, shake the deck until it aligns itself and pops in. Once you get the one J pin in, the other side goes in easily. You may not be having the same problem as me, but thought I would mention it anyways. I love my x320!
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top