My Tractor Forum banner

installing 48" deck on X320 problem

11152 Views 13 Replies 7 Participants Last post by  Markcuda
I am re-installing the deck after installing the mulch kit in it. I think I can figure everything out except for one detail. I do not know how to unlock the deck lift pedal. I did lock it by moving the pedal all the way to the back of the lawnmower. I tried pushing forward on the pedal, but it will not unlock. The height adjustment is set for the lowest position. I cannot see anything that is binding. This is my first time removing/installing a lawnmower deck. So I am a newbie at this. Please help.

1 - 3 of 14 Posts
On the draft arm, there is a right and a wrong way to install them.
Are you aware of that?
A draft arm is what is in the front of the mower deck, it goes over the front roller, that is what I meant when I said there is a right and a wrong way that this draft arm goes on.
Google a draft arm and see what you get.
Edit=I guess there are front and rear draft arms, me bad.
On the J pins, you can cut down the spring just a little, makes all the difference in the world for getting the holes aliened up.
1 - 3 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.