Joined
·
392 Posts
Briggs Stratton Lawnmower 3 5 Engine New Model 92908 | eBay
A seller in MI is selling this never-used circa 1986 Briggs & Stratton 3.5 HP 4-cycle engine, model 92908 type 5071-02. This engine was issued to replace the original engines used on these Snapper Hi-Vac mower models:
92902 0702-01 (used on 1969-71 model V210 mowers)
92905 1453-01 (used on 1974 model V211E mowers)
92905 1605-01 (used on 1975-77 model V211E, V212E mowers)
92905 1825-01 (used on 1978-82 model V212E, 21350E mowers)
92908 0703-01 (used on 1969-73 model V210 mowers)
92908 1454-01 (used on 1974 model V211 mowers)
92908 1606-01 (used on 1975-77 model V211, V212 mowers)
92908 1826-01 (used on 1978-82 model V212, 21350 mowers)
93508 0189-01 (used on 1981-82 model 21350 mowers)
NOTE 1: For electric starter-equipped machines (model 92905), transfer electric starter parts and blower housing from original engine if suitable for service.
NOTE 2: For engines used on 1974 and older machines (before code no. 74080100), change to 260877 governor spring for the correct speed setting of 3300 RPM.
~Ben
A seller in MI is selling this never-used circa 1986 Briggs & Stratton 3.5 HP 4-cycle engine, model 92908 type 5071-02. This engine was issued to replace the original engines used on these Snapper Hi-Vac mower models:
92902 0702-01 (used on 1969-71 model V210 mowers)
92905 1453-01 (used on 1974 model V211E mowers)
92905 1605-01 (used on 1975-77 model V211E, V212E mowers)
92905 1825-01 (used on 1978-82 model V212E, 21350E mowers)
92908 0703-01 (used on 1969-73 model V210 mowers)
92908 1454-01 (used on 1974 model V211 mowers)
92908 1606-01 (used on 1975-77 model V211, V212 mowers)
92908 1826-01 (used on 1978-82 model V212, 21350 mowers)
93508 0189-01 (used on 1981-82 model 21350 mowers)
NOTE 1: For electric starter-equipped machines (model 92905), transfer electric starter parts and blower housing from original engine if suitable for service.
NOTE 2: For engines used on 1974 and older machines (before code no. 74080100), change to 260877 governor spring for the correct speed setting of 3300 RPM.
~Ben
