My Tractor Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
26 Posts
Thanks Roger.
My adjust screw is almost limited out as well. Also the throttle linkage is close to the MAX rpm pin on the plate, still hovering around 3550 with HF digital tach. FYI - as a test, I also adjusted the idle by loosening the T25 bolt that holds the throttle/choke cable and moving the throttle cable house back away from the clamp. Same results. Idle rpm is 2200 I think. From what I see, there is no way to adjust from an idle of 1500 to max rpm of 3600...not enough take up in the cable.
Jack
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top