My Tractor Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1,396 Posts
Discussion Starter #1
I replaced the carb and air filter and when I started it it was racing. I seen there was another hole for one of the linkage springs so I changed it and it dropped quite a bit, but it still seems a little high unless I feather that spring that I moved. I'm sorry I don't have pics of what I am talking about, but I am short on time. Is there any way that I can adjust this to bring the speed back down to it's sweet spot? Thanks in advance!
 

·
Registered
Joined
·
1,396 Posts
Discussion Starter #2
Never mind, I got it right. The pivot arm that the linkage connects too was pushed too far in on the shaft and wouldn't move.
 

·
Registered
Joined
·
1,765 Posts
I put the GC160 on a go-kart. Powerful but the throttle assembly was a piece of junk. Also a little hard to start.
 

·
Registered
Joined
·
1,396 Posts
Discussion Starter #5
After I posted it, I was thinking the same thing. Might have to put the 190cc on for a little extra kick.
 
1 - 5 of 5 Posts
Top