[Shonuffisthemaster]

Hi, relitively new to the forum. bought this garden tractor with snowblower last summer and honestly I have forgotten what the guy said it was, it came without a hood.

it has a kohler magnum 20 opposed twin (mv20s), hydrostatic drive (hydro gear 140343) and an electric lift. came without a hood and the only info is on a sticker, manufactured exclusively for tractor supply by american yard products inc, model #ts20h50.

i couldnt find much on it with that info other than it might be a huskee? it has an mtd blower on it, which has been modified a bit to fit, but does seem to fit fairly well otherwise (mounting points line up, just one of the tie rods interfears)

any info on it would be helpfull, id like to see about implements for gardening specifically, mabey a hood. it has 500 hours on it, i paid $350 for it, figured i got a pretty good deal. runs good now after a bit of tinkering. im a little worried about the hydro drive as sometimes it dosent move right away when starting up cold. found a used one on ebay for $275 + 90 s+h, they didnt seem like they were everywhere so i thought i might get that one in case this one goes out.

 

[craftsmanmowerfreak]

it was built by AYP and is same design has craftsman and others. i have older version of this and mine has a briggs and they are beasts.

 

[Shonuffisthemaster]

it was built by AYP and is same design has craftsman and others. i have older version of this and mine has a briggs and they are beasts.

thanks for the info, do you know what i could search for to get accessories?

 

[craftsmanmowerfreak]

thanks for the info, do you know what i could search for to get accessories?

keep eye out for craftsman gts there is sleeve hitches available for multiple attachments and other things

 

[Flaken]

Jack's Small Engines has some parts for it.
https://www.jackssmallengines.com/manufacturer/ayp
or try the manufacturer:
https://www.partsandservice.com/html/AYP/

 

[MARK (LI)]

Did you call the 800 number on that tag?

 

[Shonuffisthemaster]

Did you call the 800 number on that tag?

no i didnt think of that, i should. i also have a tractor supply nearby i could ask there

 

[craftsmanmowerfreak]

no i didnt think of that, i should. i also have a tractor supply nearby i could ask there

look at how the fenders and stuff are on my craftsman. mine is older has manual trans versus ur hydro. mine also has a horixontal engine compared to your verticle but almost same frame

 

[Shonuffisthemaster]

no i didnt think of that, i should. i also have a tractor supply nearby i could ask there

look at how the fenders and stuff are on my craftsman. mine is older has manual trans versus ur hydro. mine also has a horixontal engine compared to your verticle but almost same frame

yes that looks identical in most ways, and the implement lift is also identical. thanks so much for the info, you said its a craftsman gt?

 

[Nouveau Redneck]

AYP made tractors that ended up with lots of different names on them. Some ended up as Craftsman, others ended up as MTD or J.C. Penny or Montgomery Wards or Murray, etc. Most of them made at around the same time usually shared a lot in common with each other even though there were slight differences. For basic thinks like engine components and the deck lift, you could probably use parts from any of them, but for brand specific things like the hood and a few others you would probably need to find the parts from that specific brand/model for it to be exactly right.

 

[PeterE]

I see the A and C in the parts fiche, but not the B.

TS20H50C is a Huskee-badged garden tractor. Listed accessories are: snowblower GSB42, sleeve hitch SH10, and front blade GBD48.

 

[craftsmanmowerfreak]

AYP made tractors that ended up with lots of different names on them. Some ended up as Craftsman, others ended up as MTD or J.C. Penny or Montgomery Wards or Murray, etc. Most of them made at around the same time usually shared a lot in common with each other even though there were slight differences. For basic thinks like engine components and the deck lift, you could probably use parts from any of them, but for brand specific things like the hood and a few others you would probably need to find the parts from that specific brand/model for it to be exactly right.

hate to say this but ayp never made a mower for MTD

 

[Bill Kapaun]

The only tractor in my home made data base that matches engine and has a hydro is-
http://www.managemyhome.com/mmh/lis_pdf/OWNM/L0307154.pdf


I think your transmission # is a casting number or??
Look for a number in the format-
214-3010