Help identifyig snowplow?

Merlin26 said:

I have this snowplow that came with a JD210 but isnt JohnDeere.Does anyone know what it might fit? The mounting brkt is 2in by 6in by 14in with a 3/4in pin 2 1/2in from the end.The blade is 42in wide and 16in tall.I believe its a Wheelhorse but not sure.

Click to expand...

=========================================================

I have that same plow adapted to my Sears 10XL. Pretty sure it is for a Simplicity. My plow had most of its original orange paint, as well as the big angle iron mounting brackets that went on the tractor.

John

I wouldn't even venture to Guess But I Know It Not a Simplicity at least Not Pre 2000 as stated Don't think it AMF Made(snapper and Massey), Don't think it Bolens either Or even a Late Model MTD/CCC Because Under standing the Push Bar has Been Modified it To wide for MTD. Could It Be The front end of Power King Blade? Or Is it Just a Hodge Podge of Pieces from different Manufactures and Just Cut and Welded To fit?

Sergeant said:

I wouldn't even venture to Guess But I Know It Not a Simplicity at least Not Pre 2000 as stated Don't think it AMF Made(snapper and Massey), Don't think it Bolens either Or even a Late Model MTD/CCC Because Under standing the Push Bar has Been Modified it To wide for MTD. Could It Be The front end of Power King Blade? Or Is it Just a Hodge Podge of Pieces from different Manufactures and Just Cut and Welded To fit?

Click to expand...

=========================================================

Well, I was only guessing Simplicity, because of the orange paint on mine. I picked mine up at a salvage yard some 10 or 15 years ago. It had be well used. I will at least go with factory made, because I don`t think two different people would have made identical plows from parts.

The channel tongue is a bit on the light side, and when I adapted the plow to my 10XL, I beefed it up on the underside with a rectangular frame, with an X from corner to corner.

It is only the 2ed plow of that design, that I have ever seen. Glad I can rule out Simplicity. Maybe Jacobsen ??

John

gwest_ca said:

Looks like the front 1/2 of a Wheel Horse BD-4261. Blade Dozer 42" in 1961. Take at look at the ipl
https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro
Garry

Click to expand...

Link not working but here's the photo of parts

Close enough for me :fing32:

gwest_ca said:

Looks like the front 1/2 of a Wheel Horse BD-4261. Blade Dozer 42" in 1961. Take at look at the ipl
https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro

Garry

Click to expand...

[email protected] said:

Link not working but here's the photo of parts

Close enough for me :fing32:

Click to expand...

I think You Guys are right I wouldn't Have even thought of WH:thThumbsU

I have this one,,,looks the same to me. Not sure??