My Tractor Forum banner

1 - 3 of 3 Posts

·
Three of my friends
Joined
·
9,000 Posts
Discussion Starter #1
The front wheels on the 130 looked like an overloaded VW wheels wider at the bottom than the top.Got them off and they were dry and the bushings were worn way down.Started trying to find bushing and JD has them but I thought they needed bearings so off to TSC and found wheelbarrow bearings are the same size as the spindle .750 and the wheel 1.378 and they have a shoulder like the bushing so got the right one in and it is sweet.Grease will go through the shield and I hope it will last.First picture is before and the second is after,dosent look too different in the picture but it now runs on the center of the wheel.
 

Attachments

·
Registered
Joined
·
6,278 Posts
How much were the bearings ? I just swapped some Murray wheels onto my Ford and the Ford wheels had a couple of those bearings that I swapped over. I used new metal bushings I had for the other 2. The Murray wheels had plastic bushing :thumbdown:
 

·
Three of my friends
Joined
·
9,000 Posts
Discussion Starter #3
4 bucks at tcs
 
1 - 3 of 3 Posts
Top