My Tractor Forum banner

dozer blade questions

4026 Views 6 Replies 4 Participants Last post by  garybflo
was wondering if anyone could tell me if this simplicity hitch,# 1692624, can be mounted on my regent 4211? the manuals say its for a regent 500 and a broadmoor. It also has a dozer blade.#1691520,that goes w/it. I figure if the hitch mounts then i can use the blade? I also noticed it may need a lift rod,#1692623, can this also be mounted on my 4211? If not,what should i be looking for,used, to push snow with this winter that i can mount on my 4211? any help would be appreciated:thanku:
1 - 7 of 7 Posts
im not sure of model numbers but this is what the hitch should look like.
it will fit your machine but you will also need a longer lift rod and the lift lever.
hope this helps you out.

hitch & blade

lift lever

lift rod
See less See more
the second pic is of the lift rod? any chance you could get me those model #'s? it would help...the hitch in the first pic looks like the #1692624 all this your quipment?
no, the second picture is of the lift lever you will need.
the link at the bottom of my post is a picture of the lift rod that another member posted.
yes, i currently own this stuff.
The blade will work -- they are all the same. But the push will not. As cityboy2977 showed, you need a push bar with the vertical tabs. The 1692624 frame is for a the later design which uses the fast hitch.
Have a look here on page 28:

You will also need the hitch adapter 1657663. Looks like this:

This one is going cheap. I paid $30 + shipping last year and they rarely come up.
See less See more
thx for ur help guys:thanku:
Wondering if you can help me, the dozer blade 1691520 ( above ) is the same as I have but............ where the push frame meets the bracket, there seems to be alot of "slop", almost light something is missing. The front pin is in and the rear pin is in the center postion ther seems to be about a 3/8" inch play in it. The bottom front of the push bar has a notch out of it almost looks like there should be a guide for the bracket to ride on. What I have now is rear pin, front pin, push bar and bracket. The bottom nubs ( rear of the notches )are riding on the lower part of the bracket now. Is there suppost to be spacers or anything else in there?
See less See more
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.