My Tractor Forum banner

Digger origin

869 Views 2 Replies 2 Participants Last post by  Redwood1
I'm renovating an old stone barn in France and purchased a second hand Kubota digger to get various bits done. It is a KX61-2 (I think) and is a grey import. I've had some small repairs done on it with either original Kubota parts or generic spares but have now hit a block with a couple of small hydraulic items.
I bought what Kubota UK told me were the correct parts for the model (they cannot identify it from the serial number) but they are slightly different from the parts on the machine. I've tried the local Kubota dealer in France but come up with the same issue.
There is an outside chance it is a KX61-2 Alpha and I'll check that out when I go back to the UK.
But, what would help me enormously is to find out which country the machine came from originally. Neither Kubota France or UK can help so does anyone have any advice on where I can look?
1 - 2 of 3 Posts
OK thanks. Can you let me know what the Kubota site address is as I've tried to look and not got anywhere.
The part is the left hand control which has a small leak. There are 4 nipples under the lever and one of the seals seems to be playing up. We have taken it apart and compared the nipples with the one I have from Kubota UK and they are different and not interchangeable. There is a possibility that we could just change out the two rubber seals on each nipple unit but that will probably be an even smaller needle in the haystack.
1 - 2 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.