Got caught up in other projects again.
Painted the insides of the housings with some white plastic paint I had laying around. A metallic would have been "better", but, it's what I had and it was paid for.
Masking around that edge was tough. I'll have to find a more flexible edged masking tape next time around.
No biggie, it won't be seen.
Hi. Thanks in advance for any help with this frustrating issue. What is happening is:
-Tractor starts and runs/cuts normally for about 15-20 minutes
-Starts to surge a number of times then begins to die, will run at full choke for a little bit (30 seconds) then dies
-Basically will start, run...
Last Fall on the last couple uses my tractor would stall after about 30 minutes of use or so. I'd let it cool, come back, and finish the job. In the offseason I did a tune-up in which I changed the oil, oil filter, plugs, air filters, fuel filter (and yes, it's on the correct direction), and...
I OWN A OLDER JOHN DEERE 111. THE BELT COMING OFF THE PTO BROKE WHILE I WAS MOWING. BELT WAS VERY OLD AND I ASSUME IT BROKE FROM AGE. WE REPLACED THAT BELT WITH CORRECT ONE AND REPLACED DECK BELT AND TRANNY BELT. ALL THE SPINDLES TURN FREELY. IT RUNS LIKE A CHAMP. MAYBE A COINCIDENCE BUT SINCE...